Description
Crimp Ferrule allows machine operators and maintenance personnel to connect measuring and display devices. In order to diagnose, test, or monitor system pressure, instruments, contamination, etc. The test port locations are mainly establishing during the design phase of the system. It can also carry out during operation or full system pressure.
Features
- Choose crimp ferrule based on the length of the coupling barb and the actual test hose outside diameter.
- Crimp ferrule must fit snug over the cover of the hose prior to crimping.
- As a general rule, crimp ferrule should be about 1/4″ shorter than the barb.
- If the ferrule is longer than the barb, it starts to compromise the structure if the hose is bent near the coupling.
- If the ferrule is too short then the barb will dig into the tube and lead to premature failure.
Warning
Remember to replace the seals or o-rings in case of reuse. Moreover, it is important to choose the proper length. It is indispensable to use a tube with an adequate wall thickness for the appropriate working pressures with these products and systems.
General Information
In addition to flow, the pressure is, without doubt, the most relevant parameter and measuring factor in hydraulics. Measuring system pressure is, therefore, the most important and most frequently used method for monitoring, controlling, and preventive service and maintenance of hydraulically operated machines and systems. It is the prerequisite for their economical operation.
Our Test Coupling product range is planning in suitable positions in the hydraulic system during the design phase of a machine or added at a later stage in the course of retrofitting or upgrading. They allow machine operators as well as maintenance personnel to safely connect analog and digital measuring and display devices for the temporary testing or continuous monitoring of the system pressure and other factors.
Our diverse range of Flow Measuring provides you with the ultimate solution for precise measurement. They are essential components in nearly all industries. Our exclusive flow measuring includes a variety of items to fulfill your requirements.
Centre Point Hydraulic maintains the complete inventory of Valves and Quick Release Couplings in the Middle East and Africa, ready to ship to meet your company’s needs. Furthermore, we can provide you with a free consultation and quotation through +971 4 885 6150 or centrepoint@cp-dubai.com.