Categories

Manual Brake Tubing Flaring Tool Kit

Availability: In stock

QUICK OVERVIEW

Suitable for copper, aluminium, kunnifer, steel tubing etc. Tool can be bench mounted or with care and the correct support be used in situ on the vehicle. Fast Cam Action with spring return. Pipe is clamped via a screw clamp that grips the pipe over a longer distance then cheaper flaring tools. Includes all the punches and dies required to produce 3/16”, 1/4”, 5/16”, 3/8”, 1/2” SAE and 4.75, 5, 6, 8, 10 mm DIN flares.

Compare

Additional information

Die Size

A = inch : 3/16", 1/4", 5/16", 3/8", 1/2"
M = mm: 4.75, 5, 6, 8 and 10 mm
C = inch + mm

Application

For copper, steel, stainless pipe, steel forged yoke

Description

Flaring Tool Kit Features

  1. Manual Pipe Flaring Tool Kit lets you create 3 kinds of precision flares, in any of 5 sizes of tubing, in minimal time;
  2. Create 45-degree single, double and bubble brake flares in seconds;
  3. Work with stainless steel, steel and soft metal tubing;
  4. Brake-flaring tool works with stainless steel, steel, and soft metal tubing;
  5. Use for brake lines, transmission cooler lines and fuel lines;
  6. Turret-style indexed head keeps all forming dies ready to use;
  7. Quick-release “T” handle screw clamp securely holds the tube-retaining dies.

Application

This brake flaring tool mounts in your vise to help you easily form 45-degree single, double and bubble flares in OE steel, stainless steel, and soft metal tubing for 3/16″-, 1/4″-, 5/16″-, 3/8″- and 4.75mm-diameter lines. Therefore that means it will handle all your plumbing jobs from brake lines to transmission cooler lines and fuel lines.

The design allows you to make those precision flares in minimal time. All the brake-flaring forming dies you need are mounted right on the turret, so there’s no fumbling for small parts, no worry about missing dies. “T”-handle screw clamp securely holds your line in place during forming.

To use, simply insert the tubing, swing the turret to step 1 to set the proper line depth. Turn the turret to step 2, where you’ll form the flare. To form a double flare, spin the turret to step 3 to form it without cracks or deformation, and in perfect alignment with the fitting. This assures a tight, leak-free, professional brake flare every time!

⚠️ Always wear eye protection when operating the Flaring Tool as oils, grease and metal particles may be ejected while the tool is in operation. Make sure that the Flaring tool is clamped securely in a vise, keep hands and fingers away from the mating tool faces. Wear gloves while operating this tool to avoid cuts from sharp metal edges.

Reviews

There are no reviews yet.

Be the first to review “Manual Brake Tubing Flaring Tool Kit”

Your email address will not be published. Required fields are marked *

Open chat