Solenoid Valve Pilot Acting is high flow normally closed/ open magnetic solenoid valve with a brass or stainless steel body and stainless steel springs and rings. Pilot operating solenoid valve is particularly suitable for low head and zero head applications with a coupled diaphragms. Typical Applications include tank drain and low pressure general industry applications.

Pilot Operating Solenoid Valve Features

• ▮Body ported, 5-port (4-way) spool valves;
• ▮1/8”, 1/4”, 3/8” or 1/2” NPT ports;
• ▮2-position, single solenoid normally closed, spring return; 2-position, double solenoid, energize open/energize closed; 3-position, double solenoid center closed or center exhaust;
• ▮24VDC or 120VAC solenoid coils;
• ▮DIN style wiring connector with LED indication;
• ▮Single valve also multiple manifold mounted valve applications;
• ▮Finally, Locking manual operator.

Advantages

• ▮Excellent for very large flow;
• ▮Pressure assists valve operation;
• ▮Needs minimum pressure differential;
• ▮Lower electrical power level;
• ▮Also more economical for higher flow values.

Solenoid Valve Maintenance Notice

While installing solenoid valves you should pay attention to the arrow on the valve which shall be consistent with the flow direction. The valve installation must be vertically up. prior to the installation the pipe should be thoroughly clean .The pipe also can not have reverse pressure. A filter should be install in front of the valve. And the supply voltage also have to be 15%-10% of the rated voltage.

General Information

A pilot valve is on duty to control a limited-flow control feed to a separate piloted valve. They can also be used in conjunction with solenoid valves. Piloted air valves offer a high level of control over an increased flow feed, negating the need for a much larger force.These valves are more powerful than electrical solenoids or actuators. This makes them ideal for remote and miniature applications where you need higher airflow or lower power.

Solenoid Valves Pilot Acting are the most frequently used control elements in fluids. Their tasks are to shut off, release, dose, distribute also mix fluids (liquids and gases). They use the differential pressure of the medium over the valve ports to open and close. Pilot-operated valves employ the use of the process fluid to assist in piloting the operation of the valve.

Our Solenoid Valves Pilot Acting are body ported 5-port (4-way) spool valves. Available port sizes are (1/8”, 1/4”, 3/8” or 1/2” NPT with flow coefficients (Cv) from 0.50 to 2.79). Furthermore, Models are available with single solenoid, spring return or double solenoid 2-position operation. In addition, double solenoid models are available with 3-position, center close or center exhaust operation. Solenoid coils are available in either 24VDC or 120VAC control voltages. The AVS-5 series used in individual valve applications as well as multiple valves can be field assembled on AM-5 series manifolds simplifying piping connections. AM-5 series manifolds are especially available in 2, 4, 6 or 8 stations. The DIN style wiring connector includes LED indication of the solenoid coil status.

Centre Point Hydraulic maintains the most complete inventory of Pneumatics in the Middle East and Africa, ready to ship to meet your company’s needs. Furthermore, we can provide you with a free consultation, and quotation through +971 4 885 6150 or centrepoint@cp-dubai.com.