Categories

Low Pressure Mist Nozzle type 2

Availability: In stock

QUICK OVERVIEW

Mist Nozzle consists of brass body with ceramic orifice. Misting, as a cost effective, energy saving and non polluting techniques is used both – in industrial and commercial fields to control odours and humidity, to set dusts, to cool down indoor and outdoor temperature.

Compare

Additional information

Item

Low pressure mist nozzles type 2

Brand

RN®

Material

Brass, SS

Pressure

5Bar – 20 Bar

Orifice Diameter

0.210-0.60mm

3-way connector interface size

6 mm

Spray Pattern

Fine Mist Fog Spray

Application

Sanitizing, Humidifying, Cooling, Coating, Agricultural Watering

Description

MIST NOZZLE FEATURES

  1. Mist nozzle is made of Stainless Steel material, therefore it is more durable;
  2. Easy to install by screwing into any 3/16″ threaded mist nozzle opening;
  3. Self-sealing o-ring included with each nozzle, no tape or sealant is required;
  4. Widely apply for sanitizing, garden, patio, outdoor cooling, greenhouse, humidification, small fountain, etc.

Learn more about other misting system products we can supply!

PURPOSE

  1. Cooling – outdoor restaurants, entertainment venues, stadiums, arenas, airports, bus stations, large gathering, cooling animal farms
  2. Sanitizing
  3. Dust Removal – clear the air of dust particles, mainly used to control pollution of farm and mine
  4. Agricultural – for the family farms, cultivated field mushrooms, circus arena, aviary kennel, and feeding farm. Make the environment suitable for the growth of all kinds of poultry.
  5. Industrial – metal shops, machine shops, textile workshop, garment workshop, plastic injection molding, metallurgy, leather, for cooling dust removal.
  6. Special use spaces – gardens, zoos, shopping malls, exhibitions, flower farming, animal husbandry etc.

Learn more about other misting system products we can supply!

MISTING SYSTEMS FOR OUTDOOR

Misting System describes a whole range of outdoor cooling methods that use a fine spray of water. These systems are known by a number of terms including fogging systems or Spray Cooling. They can all reduce dust and odors in the area, as well as static electricity and the presence of flying insects. They can even help regulate humidity so are terrific for plants –greenhouses, atriums, courtyards, etc. And they can cool you without getting you wet. There are some that can get you wet, though.

How does misting
system work?

Misting system for sanitizing | Centre Point Hydraulic

Related misting system products

  • Mist Nozzle

    Mist Nozzle consists of brass body with ceramic orifice. Misting, as a cost effective, energy saving and non polluting techniques is used both – in industrial and commercial fields to control odours and humidity, to set dusts, to cool down indoor and outdoor temperature.

    Read more
  • Anti Drip Mist Nozzle

    Mist Nozzle consists of brass body with ceramic orifice. Misting, as a cost effective, energy saving and non polluting techniques is used both – in industrial and commercial fields to control odours and humidity, to set dusts, to cool down indoor and outdoor temperature.

    Read more
  • Low Pressure Mist Nozzle

    Mist Nozzle consists of brass body with ceramic orifice. Misting, as a cost effective, energy saving and non polluting techniques is used both – in industrial and commercial fields to control odours and humidity, to set dusts, to cool down indoor and outdoor temperature.

    Read more
  • Low Pressure Mist Nozzle type 2

    Mist Nozzle consists of brass body with ceramic orifice. Misting, as a cost effective, energy saving and non polluting techniques is used both – in industrial and commercial fields to control odours and humidity, to set dusts, to cool down indoor and outdoor temperature.

    Read more
  • Misting Couplings

    The misting couplings are made of brass with nickel plating and connect nylon tubing. The locking occurs under pressure, the greater the pressure the harder they lock. The unique design of RN misting couplings allows them to be easily removed, replaced, or re-installed any time after the initial installation. No special tools or crimping procedures are required.


    Available Materials: Stainless Steel, Brass

    Read more
  • Misting Nozzle Quick Connector

    The Misting Nozzle Quick Connector are made of plastic and connect nylon tubing. The locking occurs under pressure, the greater the pressure the harder they lock. The unique design of RN misting couplings allows them to be easily removed, replaced, or re-installed any time after the initial installation. No special tools or crimping procedures are required.


    Available Materials: Plastic

    Read more
  • Union Elbow

    RN pneumatic Union Elbow fitting with composite body and brass tube gripping claws. The 90° union elbow fitting, or “ell,” connects two tubes at a 90-degree angle. It has push-to-connect metric tube connections on both ends. This fitting is very strong and flexible, has excellent abrasion resistance, is lightweight, and resists crushing and cracking.

    Read more
  • Union Tee

    RN pneumatic Union Tee fitting with composite body and brass tube gripping claws. For use with polyurethane or nylon tubing. Pneumatic Push in fittings union tee connects three tubes of equal tube ΦD at a 90° angle.

    Read more
  • Misting Pump 8 Bar

    This RNCool misting pump has longer life, and superior performance. Maximum pressure is 8 bar, opening flow rate is 1 litre per minute. It will be ideal for low pressure fog landscape, sanitizing, pumping gasoline, diesel, viscous liquid, spray irrigation, water spraying, cleaning air, air conditioning etc.

    Read more
  • Misting Pump 80 Bar

    This RNCool misting pump has longer life, and superior performance. Maximum pressure is 80 bar, opening flow rate is 3 litre per minute. It will be ideal for low pressure fog landscape, sanitizing, pumping gasoline, diesel, viscous liquid, spray irrigation, water spraying, cleaning air, air conditioning etc.

    Read more
  • Black Nylon Tube

    Black Nylon Tube light weight, ships to you easily, supports high pressures, ideal for most misting applications. It can also be cut easilty with plastic tubing cutter making modifications a breeze. With pressure misting application two sizes of tube are typically used. 1/4″ OD or 3/8″ OD. The pressure ratings for both are 1000 psi working and 2500 psi burst.


    Available colors: Black – it has better durability when expose to outdoor environments and sunlight.

    Read more

Reviews

There are no reviews yet.

Be the first to review “Low Pressure Mist Nozzle type 2”

Your email address will not be published. Required fields are marked *

Open chat
Thank you for your interest, text us and we will be shortly with you.

Phone no. +971 4 885 6150
Working Hours 08:00 - 14:00
Powered by