flow control valve
-
Flow Control Valve without check
Bolev® Flow Control Valve Double Acting used for adjusting flow rate at a pipe line. Very compact, accurate and easy to use. Precise control of flow and shut-off in one direction, and automatically permit full flow in the opposite direction. Single Acting Check Valve used to adjusting flow rate at a pipe line,.
-
Double Pilot Valve
Double Pilot Valve Used to operate cylinders and pneumatic actuators by utilizing a pilot air signal on both sides. solenoid valve is commonly used, a lever can be manually twist or pinch to actuate the valve, an internal or external hydraulic or pneumatic pilot to move the shaft inside, sometimes with a spring return on the other end so it will go back to its original position when pressure is gone, or a combination of any of the mention above.
-
Solenoid Valve Pilot Acting
Solenoid Valve Pilot Acting is body ported 5-port (4-way) spool valves. Available port sizes are 1/8”, 1/4”, 3/8” or 1/2” NPT with flow coefficients (Cv) from 0.50 to 2.79. Used as directional control component to change the direction of working medium to drive a executor component normally a cylinder to realize a cycle motion.
-
Solenoid Valve Pilot Acting
Solenoid Valve Pilot Acting is high flow normally closed/ open magnetic solenoid valve with a brass or stainless steel body and stainless steel springs and rings. Pilot operating solenoid valve is particularly Suitable for low head and zero head applications with a coupled diaphragms.