Valves
Check and Ball valves for your industry
A ball valve is a device with a spherical closure unit that provides on/off control of flow. The sphere has a port, also known as a bore, through the center. When the valve is positioned such that the bore is aligned in the same direction as the pipeline, it is in open position and fluid can flow through it. When rotated 90 degrees, the bore becomes perpendicular to the flow path, meaning the valve is closed and the fluid cannot pass through.
The ball valve, along with butterfly and plug valves, is part of the quarter-turn valve family. Ball valves are known for reliable, bubble-tight sealing. Thus, they are a great choice for gas applications where tight shutoff is necessary. Due to the potential of constant wearing on the seats, ball valves are not ideal for throttling applications. The body of a ball valve usually is made of steel and can be made more durable with nickel plating.
Check valves are generally installed in pipelines to prevent back flow. A check valve is basically a one-way valve, in which the flow can run freely one way, but if the flow turns the valve will close to protect the piping,
Centre Point Hydraulic maintains extensive range of valves. Including ball valves, male and female tees, check valves, gate valves and brass strainers.
-
Brass Check Valve with Filter
Brass Check Valves with Filter are generally used in conjunction with suction pumps to maintain pressure in a plumbing system while keeping out solids which could gum up the works. Although they are often found in water wells, foot valves can be used for many systems where a liquid needs to be pumped from a lower level holding area.
-
Brass foot valve
Foot Valve is Suitable for suction lines on top-offtake tanks (where an anti-siphon valve is not present). These valves are often used in dispensing pump systems, particularly with Centrifugal pumps, to prevent the pump from de-priming during rest. Suitable for use with water, Oil, Diesel, and many other none toxic acid free fluids.
-
Flow Control Valve without check
Bolev® Flow Control Valve Double Acting used for adjusting flow rate at a pipe line. Very compact, accurate and easy to use. Precise control of flow and shut-off in one direction, and automatically permit full flow in the opposite direction. Single Acting Check Valve used to adjusting flow rate at a pipe line,.
-
Brass Mini Ball Valve
Mini ball valves are made of chrome/nickel-plated brass for higher corrosion resistance than regular brass or steel; mini ball valves are most simple and common kind of valve. Inside the housing there is a metal ball with hole through it. By using valve lever operator can rotate the ball thus opening or closing the path for the medium. Industrial miniature ball valves for use as a shut-off valve in water, air and general fluid service. These valves come in sizes from 1/8 inch to 1/2 inch.
-
Forged Brass Mini Ball Valve
Brass Mini Ball Valve use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve and is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve.
