Categories

Machines

    • Uniflex S2A

      Workshop crimper S2A is compact, multi-purpose workshop crimpers prove that the advantages of the legendary slide bearing technology can also be used in light-weight, inexpensive equipment that will fit into almost any vehicle and workshop.


      CE compliant

      Read more
    • Uniflex S2M

      Workshop crimper S2M proves that the advantages of the legendary slide bearing technology can also be used in light-weight, inexpensive equipment that will fit into almost any vehicle and workshop.


      CE compliant

      Read more
    • Uniflex S6 Ecoline

      The S6 ecoline crimper is for the workshop ( or mobile) volume user who has a requirement to crimp hoses in a repair or medium production environment in a workshop or mobile van. This model is really aimed at the 2” hose market and below in both straight and elbow fittings. The machine comes with 10 die sets ( see above) but there is a good range of extra dies available which go down to 6.8mm which is often purchased for crimping of mini-test hoses and small thermoplastic hoses. The largest die available is 92mm. The 3ph model comes with integral power unit and DC model comes on feet with a sepa-rately mounted 12vDC or 24vDC Power Unit Crimping diameter is set with a micrometer and limit switch assuring accurate repeatable crimping.


      CE compliant

      Read more
    • Uniflex HM200 Ecoline

      The HM200 ecoline crimper is for the workshop volume user who has a requirement to crimp hoses in a repair or medium production environment in a workshop or mobile van. This model is really aimed at the 1 ¼” hose market and below in both straight and elbow fittings but is ca-pable of 1 ½” in 2SN or 4SP providing the crimping force required does not exceed 130 tonne. The machine comes with 8 die sets ( see above) but there is a good range of extra dies available which go down to 6.8mm and up to 62mm. Crimping diameter is set with a micrometer and limit switch assuring accurate repeatable crimping.


      CE compliant

      Read more
    • Uniflex HM200

      As the unrivalled classic in the 1 1/4″ field, with its narrow, innovative construction, high level of user friendliness, versatility and long service life, the HM 200 sets the unbeatable standard for quality and cost effectiveness. Its compact construction allows for ergonomic working. The use of solid master dies allows you to crimp all types of fittings with the greaseless slide bearing technology, which also reduces maintenance costs.


      CE compliant

      Read more
    • Uniflex S4

      As the unrivaled classic in the 1¼“ field, with its narrow, innovative construction, high level of user friendliness, versatility and long service life, the machine sets the unbeatable standard for quality and cost effectiveness.

      The use of solid master dies allows you to crimp all types of fittings with the tried and tested greaseless slide bearing technology, which reduces maintenance costs and increases product quality.


      CE compliant

      Read more
    • Uniflex S7

      Due to its narrow, innovative construction, high level of user friendliness, and long service life, the hose crimper S7 sets the standard for quality and cost effectiveness. Balanced weight and compact engineered design make the S7  perfect for workshop and on-site service up to 2″. The tried and tested greaseless slide bearing technology reduces maintenance costs and increases the product quality.


      CE Compliant

      Read more
    • Uniflex S8i S10i Ecolines

      Due to its narrow and innovative construction, high level of user friendliness and long service life, the S8i / S10i sets new standards for quality and cost effectiveness. Its compact construction allows for ergonomic working. The use of long master dies allows you to crimp 90° elbow fittings up to 2“ with the tried and tested greaseless slide bearing technology, which reduces maintenance costs and increases the product quality.


      CE compliant

      Read more
    • Uniflex S10i

      The S10i crimper is for the workshop volume user who has a requirement to crimp 2” hoses in a repair or medium production environment in a workshop or container on site. This model is really aimed at the 2”hose market and below in both straight and elbow fittings, but with larger opening than S6.2 Ecoline. The machine comes with 10 die sets ( see above) but there is a good range of extra dies available which go down to 6.8mm which is often purchased for crimping of mini-test hoses and small thermoplastic hoses. The largest die available is 131mm. Crimping diameter is set with a micrometer and limit switch assuring accurate repeatable crimping.


      CE compliant

      Read more
    • EM3 Ecoline

      For each type of workshop: This cutting machine with its 3 kW drive is also available as an ecoline or DC variant. For hydraulic hoses up to 1 ¼”.


      CE compliant

       

      Read more
    • EM3 DC

      The EM3 DC is designed for mobile van or truck operator. Available in 12v or 24v options. Small, lightweight, but powerful unit.


      CE compliant

      Read more
    • EM 6 M

      UNIFLEX Hose Cutting Machine EM6 M has unique drive motors with double bearings and oversized shafts to avoid vibration.


      CE compliant

       

      Read more
    • EM8 M

      This production cutting machine is available as a manual and as a pneumatic variant.  Its cutting motors ensure optimum cutting results thanks to their unique minimum vibration. 4.6 kW drive. For hydraulic hose assemblies up to 2” and industrial hose assemblies up to 4”.


      CE compliant

      Read more
    • EM8 P

      This production cutting machine is available as a manual and as a pneumatic variant.  Its cutting motors ensure optimum cutting results thanks to their unique minimum vibration. 4.6 kW drive. For hydraulic hose assemblies up to 2” and industrial hose assemblies up to 4”.


      CE compliant

      Read more
    • EM 110

      The safe high-quality cutting machine for the production process. All cutting blades are made of carefully tested material which ensures optimum cutting quality. 7.5 kW drive max. For hydraulic hose assemblies up to 2” and industrial hose assemblies up to 4”.


      CE compliant

       

      Read more
    • HM 220

      Due to their narrow, innovative construction, high level of user friendliness, and long service life, the HM 220 set the standard for quality and cost effectiveness.


      CE compliant

      Read more
    • Uniflex HM 225

      Due to their narrow, innovative construction, high level of user friendliness, and long service life, the HM 225 set the standard for quality and cost effectiveness.


      CE compliant

      Read more
    • Uniflex HM 325/375/380

      As reliable classic machines, the HM 325/375/380 series unites all the outstanding properties of a production crimper. Combining a convincingly solid construction with a high level of user friendliness, and long service life, the HM 325/375/380 set a new standard for quality and cost effectiveness. They are compact, powerful and make ergonomic working possible.


      CE compliant

      Read more
    • Uniflex HM 480

      Due to their compact, all-round accessible construction, high level of user friendliness, and long service life, the HM480 set the standard for quality and cost effectiveness. The crimpers‘ particularly large opening stroke and the use of long master dies allow you to crimp all types of fittings and up to 8″ industrial hoses.


      CE compliant

      Read more
    • USM 2

      The skiving device for mobile use. For skiving hoses up to 2” on the inside and the outside.


      CE compliant

      Read more
    • USM 10 ecoline

      The skiving machine for the workshop. For skiving hoses up to 2” on the inside and the outside. 0.37 kW drive.


      CE compliant

      Read more
    • UNE 10

      A high-performance nipple inserter for inserting fittings that are difficult to assemble.


      Ecoline

      Read more
    • Marking Tool UP10 ecoline

      This embossing device in compact table-top design is convincing thanks to easiest handling.


      CE Conform

      Read more
    • PR 10

      The use of gas conducting hoses (e.g. air, nitrogene etc.) requires the perforation of the cover. The PR 10.2 tool provides an easy solution for quick pin pricking of the cover. Market established UNIFLEX quality gives you a precision tool for hoses up to an outer diameter of 45 mm (1,75 inch).


      CE Conform

      Read more
    • Cleaning Machine RG 10

      This hose cleaning machine with two flushing heads is suited for all types of hose and tube assemblies.


      CE Conform
      Read more
    • Tube Cutter

      Tube Cutters are used for cutting tubes of nylon, soft nylon, polyurethane, and other soft plastic tubes of 12mm or less. It’s durable enough to cut hard plastic tubing yet lightweight and small enough for convenient storage. Suitable for 1/8″ to 3/4″ O.D. tubing.

       

      Read more
    • Tube Cutter

      This tube cutter is a truly compact solution for large capacity plastic and multilayer pipe allowing fast one-hand operation. It features Quick-Ratcheting mechanism and the advanced blade with teflon coating for greater performance and ease of cut.

      Read more
    • Telescopic Tube Cutter

      Durable RN tubing cutters with screw feeding mechanism for stable tracking and smooth cutting.


      CAPACITY 3-28 mm (1/8″ – 1 1/8″) O.D. Tube Including One Spare Cutting Wheel

      Read more
    • Tube Cutter

      Durable tubing cutters with screw feeding mechanism for stable tracking and smooth cutting.


      With Integrated deburrer

      Including one spare cutting wheel

      Easy and fast to replace the spare cutting wheel

      Cutting wheel size: 5.0×20.0 mm

      Easy and fast to replace cutting wheel

       

      Read more
    • RN350 Hose Crimper

      RN350 Hose Crimper has automatic and foot pedal opening and closing control. It is designed for large maintenance activities, particularly for heavy fittings. RN350 has high production capacity, precision and durability.

      Read more
    • Manual Hose Crimping Machine (25 mm)

      Engineered for outdoor service jobs that require low pressure hose crimping, the RNP100 is a light-weight device with a compact and ergonomic design. This crimping machine showcases a 25 mm maximum diameter and a Ø+21 mm die opening. This device exhibits 500x180x130mm dimensions and weighs in at 12 kg.

      Read more
    • Tube Bending Deburring / Flaring

      New multifunctional mobile unit for carrying out all operations required to machining rigid hydraulic tubes: internal and external deburring, bending, pre-mounting rings according to the DIN 2353 standards, 37° flaring of rigid stainless steel (AISI 316 TI) and carbon steel (ST 37.4) rigid tubes, for 6 to 42 mm and 4 mm thick fittings complying with the SAE and JIC standards.

      Read more
    • Tube Bending Tool 6 – 25 (mm)

      RN Tube Bending Tool is a manual device designed for bending strong pipes, diameter between 6 to 18 mm, made of AISI 316 TI rigid stainless steel and ST 37.4 carbon steel. It has a fixing pin, which allows fixing to all devices.

      Main Features: Fixing pin, Complete with bending tools and tool holder

       

      Read more
    • Tube Bending Tool

      This Tube Bending Tools are precision machined and built to exacting specifications. Bends tubing while maintaining roundness and surface finish. This hand tube bender can be used to form single, offset and other bends in tubing that is fully annealed, high-quality seamless or welded and drawn. Suppose you want to make a 90-degree bend four inches from the end of the tube, followed by a 180-degree bend, with four inches between bends.

      Read more
    • Hydraulic A/C Crimping Tool Kit

      The lightweight hand-held hydraulic press is very portable and ideal for shop and field applications. The kit comes with a complete set of dies covering hose sizes #6, #8, #10, #12 and reduced barrier #6, #8, #10 and #12. The dies snap quickly into the press fixture requiring no pins or screws. (patent# 6,324,884) Kit comes in a custom molded case.

       

      Read more
    • Manual Brake Tubing Flaring Tool Kit

      Suitable for copper, aluminium, kunnifer, steel tubing etc. Tool can be bench mounted or with care and the correct support be used in situ on the vehicle. Fast Cam Action with spring return. Pipe is clamped via a screw clamp that grips the pipe over a longer distance then cheaper flaring tools. Includes all the punches and dies required to produce 3/16”, 1/4”, 5/16”, 3/8”, 1/2” SAE and 4.75, 5, 6, 8, 10 mm DIN flares.

      Read more
    • Hydraulic Pipe Flaring Tool Kit

      This versatile tool will help you create flares for brake lines, fuel lines, transmission lines, vacuum, oil, coolant, hydraulic or other custom hard line applications. The tool, and all of its clamp and flare dies, are custom fitted and stored in a tough molded carrying case. Hydraulic flare tool and all dies come in a molded, compartmentalized storage box.

      Read more
    • Suction Device

      The safe high-quality cutting machine for the production process. All cutting blades are made of carefully tested material which ensures optimum cutting quality. 7.5 kW drive max. For hydraulic hose assemblies up to 2” and industrial hose assemblies up to 4”.


      CE compliant

       

      Read more
    Open chat