Pneumatics
Pneumatic components are still today the most cost-effective, reliable means of creating motion. We’ve applied pneumatic components for over 40 years. We ensure we have the highest skill level across a wide range of industrial markets. RN one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the RN to be used for a wide range of pressures. From a low vacuum up to a pressure of 1MPa. The RN release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing.
Quick Couplings usage
Centre Point Hydraulic is the largest quick coupling supplier in the world. Providing quick disconnects and accessories that are appropriate for use in countless applications across widespread markets.
-
Union Elbow
RN pneumatic Union Elbow fitting with composite body and brass tube gripping claws. The 90° union elbow fitting, or “ell,” connects two tubes at a 90-degree angle. It has push-to-connect metric tube connections on both ends. This fitting is very strong and flexible, has excellent abrasion resistance, is lightweight, and resists crushing and cracking.
-
Union Y
Union Y is a composite material push-to-connect fitting. The fitting is Y-shaped and connects a tube to two tubes running in the same direction. It has push-to-connect tube connections on all three ends. Fitting is very strong and flexible, has excellent abrasion resistance, is lightweight, and resists crushing and cracking. It is also suitable for handling pressures up to 145 psi (10 bar), has an operating temperature range of 0 to 60 degrees C (-4 to +176 degrees F), and has a vacuum capability of 755 mm Hg.
Union Y meets Restriction of Hazardous Substances (RoHS) and International Organization for Standardization (ISO) 14743 technical specifications.
-
Union Cross
This 90-degree Union Cross with mounting holes is a metric composite body push-to-connect fitting. The cross fitting has four openings positioned at 90-degrees from each other for connecting and branching four tubes. It has push-to-connect metric tube connections on all four ends. This fitting is very strong and flexible, has excellent abrasion resistance, is lightweight, and resists crushing and cracking.
-
Multi Union
RN Multi Union fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and water systems. They are made of composite materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
-
BSP MALE
BSP Male connector push in fitting accommodates metric tubing ranging from 4mm O.D to 16mm O.D, inch tubing ranging from 1/8″ O.D to 1/2″ O.D. The male connector (male straight) push in fitting connects inline tubing to a female threaded port. External tightening with a flat wrench or socket wrench, internal adjustment with RN wrench. The body of male connector can be nickle plated brass and natural brass for customers’ demand.
-
BSP Female
BSP Female accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tube O.D Ranging from 1/8″ to 1/2″ and Thread Ranging from M5, M6, BSPT 1/8 to BSPT 1/2. Pneumatic fittings female swivel elbow is widely used to connect tubing at a 90° angle to a male threaded port. External tightening with a flat wrench.
-
Male Branch Tee
RN Composite Male Branch Tee accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tubing O.D Ranging from 1/8″ to 1/2″. Accommodate Thread Ranging from 1/8 NPT to 1/2 NPT. One touch tube fittings male branch tee is widely used in pneumatic circuit. In line connection of tubing to a female threaded port. External tightening with a flat wrench.
-
BSP Male Run Tee
BSP Male Run Tee accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tube O.D Ranging from 1/8″ to 1/2″ and Thread Ranging from M5, M6, BSPT 1/8 to BSPT 1/2. Push to Connect Fittings male run tee use to branch line in the same direction from female thread and in 90° direction. External tightening with a flat wrench.
-
BSP MALE Y
BSP MALE Y accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tube O.D Ranging from 1/8″ to 1/2″ and Thread Ranging from M5, M6, BSPT 1/8 to BSPT 1/2. Push to connect fittings male Y is used to connect two tubings in the same direction from female thread. External tightening with a flat wrench.
-
Plastic Hand Valve
RN brand Hand valves (shut-off valves, plastic pneumatic valves, pneumatic fittings) are used for turning air pressure on and off for pneumatic devices.
The three-ways RN control hand valve, when closed, discharges the residual pressure from the output side (device). Therefore it assures safety at adjustment or repair of the connected devices.
The two-ways RN control hand valve does not have air discharge mechanism, is suited for air supply to a tank or other devices from which the residual pressure should not be discharged. The two-directional control valve is also suited for the system where vacuum piping is used.
-
Double Pilot Valve
Double Pilot Valve Used to operate cylinders and pneumatic actuators by utilizing a pilot air signal on both sides. solenoid valve is commonly used, a lever can be manually twist or pinch to actuate the valve, an internal or external hydraulic or pneumatic pilot to move the shaft inside, sometimes with a spring return on the other end so it will go back to its original position when pressure is gone, or a combination of any of the mention above.
-
Solenoid Valve Pilot Acting
Solenoid Valve Pilot Acting is body ported 5-port (4-way) spool valves. Available port sizes are 1/8”, 1/4”, 3/8” or 1/2” NPT with flow coefficients (Cv) from 0.50 to 2.79. Used as directional control component to change the direction of working medium to drive a executor component normally a cylinder to realize a cycle motion.
-
Solenoid Valve Pilot Acting
Solenoid Valve Pilot Acting is high flow normally closed/ open magnetic solenoid valve with a brass or stainless steel body and stainless steel springs and rings. Pilot operating solenoid valve is particularly Suitable for low head and zero head applications with a coupled diaphragms.
-
Straight Air Chuck with Clip-On
The Straight Air Chuck with Clip-on fits most inflators, but specifically useful for use with tire inflator gauges. Inflates tires easily, even on heavy-duty work vehicles. There’s no need to thread the chuck to valve stems, because a locking clip securely seals the air chuck into place on a valve stem.
-
Clip-On Ball Foot Air Chuck
Clip-On Ball Foot Air Chuck is a standard brass ball foot air chuck with an attached steel clip for holding the chuck in place on the valve stem during air filling operations. Use to inflate car and bike tires. And built in shut-off valve seals air when not in use. High quality Air ball chuck made from strong brass and zinc with clip.
-
Pneumatic One Way Air Flow Control Valve
Allows air flow to be precisely controlled in line. Great for controlling air cylinders or actuators by allowing you to set the speed of operation. Always use on the exhaust line to avoid stick and slip. Allows full flow of air in one direction (going into actuator) and restriction (set by adjusting needle) on the exhaust.
-
Spiral Tube with Coupling
Spiral Tube is extremely light in weight, flexible like rubber over wide range of temperature. Comes with a general-use coupling as standard, so pneumatic tool attachment/removal can be carried out smoothly. This tube is far more durable than standard rubber & PVC hoses, having longer service life and excellent flexibility.
-
Dual Pass Coupler
Dual Pass Coupler provides instant tubing connections. Widely applicable for hose connection of pneumatic devices and air piping at plants, etc. It has a 1/4″ port on the bottom for you to connect this item into your air line. Dual Pass Couplers are only used for industrial automatic apparatus and can not be applied on any medicinal equipment.
