Categories
Hydraulic Hose Pressure Ratings | Centre Point Hydraulic | BLOG

Hydraulic Hose Pressure Ratings

Hydraulic Hose Pressure Ratings: Working Pressure vs. Burst Pressure

One of the most important questions we ask our customers when we are helping to choose the right hose or replace a hose assembly is, “what is the working pressure for this application” and, “is the pressure dynamic or static?” The working pressure is the highest amount of pressure that the hose assembly will operate under, including spikes. It must be accounted for and never guessed or assumed. You might have heard of “S.T.A.M.P.E.D” before. The “P” stands for Pressure, but you can read about all of them here.


S.T.A.M.P.E.D. the most important part of the hose selection process

What to know before selecting the right hose?

An important detail that is helpful when discussing which hose you need for your application is whether your pressure is dynamic or static. Dynamic pressure means your system can have fluctuations, temperature changes, and shocks/pulses to the system. Static pressure is basically the opposite of dynamic pressure, in  fact that the pressure is constant, without pulses or temperature changes.

As an example, if a hydraulic system has a 4,000 psi pressure rating, including spikes, we would insist on using a hydraulic hose rated to 4,000 psi. This has to include the fittings because the weakest point in the hydraulic system sets the pressure rating for the whole thing. If your 4,000 psi hose is attached to a 3,500 psi fitting, your assembly is not 4,000 psi rated. This ensures that the assembly will handle that constant working pressure and is up to the specific requirements of your system. An unsuitable hose assembly poses a great danger to those working around it.

Working Pressure vs Burst Pressure

All HYDROFLEX hydraulic hoses offer a 4:1 safety factor, which means if the hose is rated at 5,000 psi working pressure, the burst pressure will be 20,000 psi. Keep in mind, the lowest rated component gives the overall assembly’s working pressure rating. Just because a hose assembly is rated to 5,000 psi doesn’t mean all of adapters are too. Do your due diligence and make sure your adapters are correct.

It is imperative that you adhere to the strict guidelines of the hydraulic hose rating. Failure to do so could lead to a catastrophic failure, resulting in unnecessary downtime, property damage, injury and environmental consequences, including large fines.

As an example, if a hydraulic system has a 4,000 psi pressure rating, including spikes, we would insist on using a hydraulic hose rated to 4,000 psi. This has to include the fittings because the weakest point in the hydraulic system sets the pressure rating for the whole thing. If your 4,000 psi hose is attached to a 3,500 psi fitting, your assembly is not 4,000 psi rated. This ensures that the assembly will handle that constant working pressure and is up to the specific requirements of your system. An unsuitable hose assembly poses a great danger to those working around it.

Make the right decision!

Cutting corners by using a hose that isn’t rated for your system’s pressure requirements is extremely risky. It is crucial to supply all system ratings to Centre Point Hydraulic expert when deciding which series of hose to use. It is our job to educate our customers on importance of using the right hose for the right job, every time. Guessing at the working pressure is dangerous, and could cause serious injuries, including fatalities.


See our location in Dubai Investment Park 1

This content of article is used from  https://www.crossco.com/blog/hydraulic-hose-pressure-ratings-working-pressure-vs-burst-pressure/

About the Author

marketing@cp-dubai.com

Related Post

Submit a Review

Display Name

Email

Title

Message

Open chat